foam fountain nozzle

Foam Fountain Nozzle

The nozzle of the foam fountain will inhale air when it works, forming a white swollen water body mixed with water and air. When installing this nozzle, the nozzle should be located 3-5 cm below the water surface, and a valve must be installed under each nozzle to adjust the water volume. This kind of fountain is very suitable for installation in hotels, urban road waterscapes and gardens.

Floating Music Fountain Project In Yunnan Province

News Floating Music Fountain Project In Yunnan Province Fountain Project Case-Floating Music Fountain Project In Yunnan Province Project overview: 60 meters long, 40 meters wide, and the construction period is 3 months. Project introduction: The project is a lifting musical water dance fountain in the lake. The water depth is about 3000mm. The project includes…

New Project Installation Site

News fountain installation training New Project Installation Site The floating fountain in Luzhou City, Sichuan Province is 4M*4M in size with a floating system. Our new fountain project is located in an artificial lake in Luzhou City, Sichuan Province, China. This dance fountain is a circular fountain with a diameter of 4 meters. Its main…

Fountain Installation Training

News fountain installation training Theme: Installation Training Our company organized employees to go to the square fountain construction site to learn the knowledge of fountain installation in order to better serve customers. The fountain installed on the square is different from the fountain installed on the water. The installation of the square fountain is closely…

Cold Fog Fountain

The mist fountain uses a high-pressure mist-making system. It sprays purified water in the form of 1-15 microns (0.001mm) fine mist. And this is like natural fog floating in the air, thus makes people feel like being in a fairyland and feeling relaxed.
The large amount of negative ions produced by it can make the air fresh and humid, and change the local microclimate. The mist absorbs heat when it evaporates quickly, thereby achieves the effects of cooling, landscaping, and air purification. Artificial mist fountain is widely used in gardens and environmental landscapes. It mainly for parks, stages, leisure places, fountains and other places. Our high-pressure mist generation system produces very fine mist. So we use it widely in various fountain waterscapes.

Water Screen Movie

Water screen movie is a method of projecting video content onto a specially designed large water screen through a projector. This technology is one of the main forms of large-scale musical dancing fountain shows. Water screen movies are usually built in places with water sources, such as lakes, rivers or large artificial ponds. And the water screen generator spray water from bottom to top at high speed by high-pressure water pumps and special water screen nozzles , and atomize it into a fan-shaped “screen”.

Jumping Fountain

Laminar flow jumping fountain is a kind of fountain that sprays water into glass under pressure. First, the water enters the laminar jumping fountain equipment through the water inlet. And then enters the filter. Finally sprayed from the water jet to form a glass rod-shaped arched fountain. This transparent water column is very ornamental. It is different from the laminar flow fountain in that there is a cutting device in the equipment. The stepper motor drives the baffle of the cutting device to move, thereby cutting the continuous water column into segments, as if the water column is beating, so this fountain It’s called jumping fountain.